Digi ConnectCore 6 Plus, Hardware Reference Manual, Page: 34 / 105

About the ConnectCore 6 Plus Module pinout
ConnectCore 6 Plus Hardware Reference Manual 34
Module pinout
The module has a LGA pad structure based on 400 pads. See the following diagram for the general
layout, which shows the top view of the module pinouts.
The following table provides the pinout of the ConnectCore 6 Plus module.
Additional timing and electrical information can be found in either NXP i.MX6QP processor datasheet
(
www.nxp.com ) or in Dialog DA9063 product datasheet ( www.dialog-semiconductor.com ).
LGA
pad
Pad name Multiplexing Power group Comments
A5 CSI0_MCLK ALT0: IPU1_CSI0_HSYNC
ALT1:
ALT2:
ALT3: CCM_CLKO1
ALT4:
ALT5: GPIO5_IO19
ALT6:
ALT7: ARM_TRACE_CTL NVCC_CSI