Services
Enable service discovery (mDNS)
Digi Connect IT® 16/48 User Guide
427
5. Add Ethernet devices:
a. Use the
?
to determine available devices:
(config network bond
name
)> ... network device ?
Additional Configuration
-----------------------------------------------------------------------
-----
eth1
eth2
loopback
sfp1
sfp2
(config network bond
name
)>
b. Add a device:
(config network bond
name
)> add device /network/device/eth1
(config network bond
name
)>
c. Repeat to add additional devices.
6. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
7. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Enable service discovery (mDNS)
Multicast DNS mDNS is a protocol that resolves host names in small networks that do not have a DNS
server. You can enable the Connect IT 16/48 device to use mDNS.
WebUI
1. Log into the Connect IT 16/48 WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Services
>
Service Discovery (mDNS)
.
4.
Enable
the mDNS service.
5. Click
Access control list
to configure access control:
