Digi Connect EZ regulatory and safety statements
RF exposure statement
In order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance
between the antenna or antennas and the user should not be less than
20 cm
.
Federal Communication (FCC) Part 15 Class A
These devices comply with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) These devices may not cause harmful interference, and (2) These devices must accept
any interference received, including interference that may cause harmful operation.
European Community - CE Mark Declaration of Conformity (DoC)
Digi has issued Declarations of Conformity for the Connect EZ concerning emissions, EMC, and safety.
For more information, see
www.digi.com/resources/certifications
Important note
Digi customers assume full responsibility for learning and meeting the required guidelines for each
country in their distribution market. Refer to the radio regulatory agency in the desired countries of
operation for more information.
CE and UKCA OEM labeling requirements
The CE and UKCA markings must be clearly visible and legible when you affix it to the product. If this
is not possible, you must attach these marks to the packaging (if any) or accompanying documents.
CE labeling requirements
The “CE” marking must be affixed to a visible location on the OEM product. The following figure
shows CE labeling requirements.
Digi Connect EZ Mini User Guide
607
