System administration
Configuration files
Digi Connect EZ Mini User Guide
520
Configuration files
The Connect EZ configuration file, /etc/config/accns.json, contains all configuration changes that have
been made to the device. It does not contain the complete device configuration; it only contains
changes to the default configuration. Both the default configuration and the changes contained in the
accns.json file are applied when the device reboots.
Save configuration changes
When you make changes to the Connect EZ configuration, the changes are not automatically saved.
You must explicitly save configuration changes, which also applies the changes. If you do not save
configuration changes, the system discards the changes.
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Make any necessary configuration changes.
4. Click
Apply
to save the configuration and apply the change.
Command line
1. Log into the Connect EZ command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. Make any necessary configuration changes.
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
