Virtual Private Networks (VPN)
OpenVPN
AnywhereUSB® Plus User Guide
617
a. Enable the use of additional OpenVPN parameters:
(config vpn openvpn server
name
)> advanced_options enable true
(config vpn openvpn server
name
)>
b. Configure whether the additional OpenVPN parameters should override default options:
(config vpn openvpn server
name
)> advanced_options override true
(config vpn openvpn server
name
)>
c. Set the additional OpenVPN parameters:
(config vpn openvpn server
name
)> extra
parameters
(config vpn openvpn server
name
)>
10. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
11. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Configure an OpenVPN Authentication Group and User
If username and password authentication is used for the OpenVPN server, you must create an
OpenVPN authentication group and user.
See
for information about configuring an OpenVPN server to use
username and password authentication. See
AnywhereUSB Plus user authentication
for more
information about creating authentication groups and users.
É
WebUI
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
Summary of Contents for AnywhereUSB Plus
