Digi 9XTend-PKG-R RS-232, User Manual, Page: 37 / 98

Command reference table
9XTend-PKG-R RS-232/485 RF Modem User Guide 37
CC 0x13 (19d) Command Sequence
Character
0x20 - 0x7F Command Mode
Options
1 0x2B ["+"]
(43d)
CD 0x28 (40d) GPO2 Configuration 0 - 4 Serial Interfacing 1 2
CF -- Number Base 0 - 2 Command Mode
Options
1 1
CN 0x09 (9d) Exit Command Mode -- Command Mode
Options
-- --
CS 0x1F (31d) GPO1 Configuration 0 - 4 Serial Interfacing 1 0
CT 0x06 (6d) Command Mode Timeout 2 - 0xFFFF [x 100 ms] Command Mode
Options
2 0xC8
(200d)
DB 0x36 (54d) Received Signal Strength 0x6E - 0x28 [read-only] Diagnostics 2 --
DT 0x00 (0d) Destination Address 0 - 0xFFFF Networking and
Security
2 0
E0 0x0A (10d) Echo Off -- Command Mode
Options
-- --
E1 0x0B (11d) Echo On -- Command Mode
Options
-- --
ER 0x0F (15d) Receive Error Count 0 - 0xFFFF Diagnostics 2 0
FH 0x0D (13d) Force Wake-up Initializer -- Sleep (Low
Power)
-- --
FL 0x07 (7d) Software Flow Control 0 - 1 Serial Interfacing 1 0
FS 0x3E (62d) Forced Sync Time 0 - 0xFFFF [x 10 msec] RF Interfacing 2 0
FT 0x24 (36d) Flow Control Threshold 0 - (DI buffer size - 0x11)
[Bytes]
Serial Interfacing 2 DI buffer
size minus
0x11
GD 0x10 (16d) Receive Good Count 0 - 0xFFFF Diagnostics 2 0
HP 0x11 (17d) Hopping Channel 0 - 9 Networking and
Security
1 0
HT 0x03 (3d) Time before Wake-up
Initializer
0 - 0xFFFF [x 100 msec] Sleep (Low
Power)
2 0xFFFF
(65535d)
HV -- Hardware Version 0 - 0xFFFF [read-only] Diagnostics 2 --
ID 0x27 (39d) Modem VID 0x11 - 0x7FFF (user-settable)
0x8000 - 0xFFFF (factory-set,
read-only)
Networking and
Security
2 0x3332
(13106d)
AT
Command
Binary
Command AT Command Name Parameter Range
Command
Category
# Bytes
Returned
Factory
Default