11
VHX
DOS 1.71 OWNER’S MANUAL.
© 2020 Diezel GmbH. All rights reserved.
d
CAB SIM
The integrated DSP does provide an IR based cabinet simulation as
well. Specifically developed for the VHX, it allows you to quickly
connect to FOH, without the hassle of configuring the microphones on
stage.
CAB SIM could then be used in both
CABLESS
mode, without cabinet
or load, or in parallel with the POWER AMP with a connected cabinet.
Both
HEADPHONES
and
XLR
are controlled from the CABSIM screen
and could be used in parallel.
HEADPHONES
and
XLR
supports
DI
mode, to be used with your
preferred cabinet simulation hardware/software, or for reamping
purpose.
DI
Rotate the relative encoder to toggle DI MODE.
SPEAKER
Rotate the relative encoder to scroll between the available SPEAER: V30, G12K-100.
MIC
Rotate the relative encoder to scroll between the available MIC: SM57, R121, C414, MD421.
POSITION
Rotate the relative encoder to choose the MIC position relative to the speaker.
LEVEL
Rotate the relative encoder to adjust output level. Please note that output level will affect both HEADPHONES and XLR.
HIGH
Rotate the relative encoder to adjust the high frequency response.
LOW
Rotate the relative encoder to adjust the low frequency response.