10
VHX
DOS 1.71 OWNER’S MANUAL.
© 2020 Diezel GmbH. All rights reserved.
d
FX EDIT
FX Edit screen let you edit selected effect parameters, by rotating the relative encoder. Push the
BACK
encoder to return to FX SELECTION Screen.
PUSH the
EFFECT NAME
encoder to
TOGGLE
BYPASS
. Some parameters (i.e. DELAY TIME, PITCH) do have a
FINE
and
COARSE
mode. Push the
relative parameter encoder to toggle between the two modes.
FX LIST
Below the effect list and the relative parameters.
CHORUS
Speed, Depth, Feedback, Tone, Level.
COMPRESSOR
Sustain, Attack, Release, Blend, Level.
DELAY
Time (MIDI CC#2), Feedback, Speed, Depth, Damping, Tone, Level, TAP.
EQUALIZER
80 Hz, 240 Hz, 750 Hz, 2.2 KHz, 6.6 KHz, Bandwidth, Level.
FLANGER
Speed, Depth, Feedback, Level.
LOOP A / B
Mix, Send Level, Return Level.
NOISE GATE
Threshold, Attack, Release, Decay.
PHASER
Speed, Depth, Feedback, Level.
PITCH SHIFT
Mode (QUAD, POLY), Pitch, Mix, Pitch A, Pitch B, Pitch C, Pitch D, Pitch Mix, Level.
REVERB
Room, Decay, Damping, Tone, Level.
TREMOLO
Speed (MIDI CC#2), Depth, Slope, TAP.