16
17
DIETZ GmbH / Operating instructions standard wheelchair CANEO_B / Version 2.0.1. EN
3.6 Seat depth
The wheelchair is always delivered with the
maximum possible seat depth. To reduce the
seat depth, first remove the leg supports. Next,
open the Velcro straps on the right and left of
the seat frame. Secure the Velcro straps to the
extension so that they are no longer wrapped
around the frame. Fold the extension beneath
the seat and fasten the Velcro straps to secure
it there.
Carry the procedure out in the opposite se-
quence to increase the seat depth.
03 PUTTING INTO OPERATION
03 PUTTING INTO OPERATION
3.7 Lower leg length
The setting is correct when your upper legs are
horizontal with your feet positioned on the
foot plates.
To adjust, release the adjustment screw one
quarter of a turn and pull the locking mecha-
nism backwards. Move the foot plate to a
comfortable position and release the locking
mechanism again. The mechanism automati-
cally locks in the next position. Then tighten
the adjustment screw securely again.
