“SUZO” - Rev. 01 22/09/2017
32
5
MAINTENANCE AND CLEANING
5.1 MAINTENANCE
The product components do not require particular maintenance.
However, before each use carefully check to ensure that no electrical part has been damages
and, in particular, that the double insulation of the power cable is intact.
HAZARD
If it becomes necessary to remove the cover of the electrical com-
partment, make sure that this operation is performed after the power
cord has been unplugged.
This operation must be performed exclusively by qualified personnel.
5.2 SPARE PARTS
Use only spare parts that have been approved or produced by the Manufacturer.
The Manufacturer only allows end users to replace original spare parts with parts described below.
COMMERCIAL SPARE PARTS:
1. Supply powers with plug
5.3 CLEANING
Cleaning of the unit’s external parts can be performed either with a dry cloth or a cloth dampened
with mild soap. Do not use abrasive products.
IMPORTANT NOTE
• Before cleaning, unplug the unit from its power source and make sure that the
power cables are not damaged.
• Prevent liquids from coming into contact with electrical/electronic components.
6
PRODUCT FEATURES
6.1 SUITABLE ENVIRONMENTAL CONDITIONS FOR OPERATION
AND TRANSPORTATION
Transportation/storage temperature
From -20 °C to +50 °C
From -4 °F to +122 °F
Operation temperature
From +10 °C to +40 °C
From +50 °F to +104 °F
Relative humidity
From 30% to 75%
Atmospheric pressure
From 800 hPa to 1060 hPa
Height
<2000 m
