“SUZO” - Rev. 01 22/09/2017
29
Fig. 3.10
•
Position the assembled supports and top on the beam (see Fig. 3.10), making sure they are
properly centered, as in Fig. 3.3
•
Actuate the support lever and rotate the beam connection body by 90 ° (see Fig. 3.10)
•
Insert the support cage and close the connecting body of the beam (see Fig. 3.10, item 1)
•
Fasten the supports with the dedicated plates and secure them with 4+4 TBEI CH4 M6X14
Ø13 screws provided (see Fig. 3.10, item 2).
3.6 ASSEMBLY INSTRUCTION LINK
IMPORTANT NOTE
For additional assembly information, please view the Manufacturer’s
video at the following link
