ME 200 E ENG
- 26 -
DISPLAY-RELAY TEST FUNCTION
DISPLAY TEST: press the key
, all the LEDs
and displays will turn on for a few seconds.
RELAY TEST: press the key
for 3 seconds, the
message rEL appears and then the first PRE relay
is proposed.With the keys
it is possible
to switch between 0 and 1 to energise and de-
energise the relay, once the test is completed press
to go to the next relay, press
to exit the
test function at any time.
PROGRAMMING
Press simultaneously the keys
for a
few seconds to enter the PROGRAMMING
menu, the message PRG appears, then
parameter F in the first display will indicate
and the configuration in use
Choose the desired configuration by pressing
the UP/DOWN keys choosing between:
•
0: eight probes without fans control.
•
1: eight probes with fans control.
•
4: access to the advanced programming
menu.
>> Paragraph
ADVANCED
PROGRAMMING
Confirm with
