DIEBOLD NIXDORF D1064, Operator'S Manual

Page: 46 / 63

Display Commands
9.1.14
9.1.14 Set Serial Port
Code Hexadecimal
ESC [ < b >;< d >;< p >;< s > s 1B 5B < b > 3B < d > 3B < p > 3B < s > 73
Description:
This is an alternate command to set the serial communication settings. The parameters are ASCII coded
decimal values or alphabetical character:
Parameter Values
b
Baud rate 9600 to 115200
d
Data length 7 or 8
p
Parity 0 = none
1 = odd
2 = even
s Stop bit 1 or 2
Notes:
1. This command is not applicable in USB mode.
9.1.15
9.1.15 Set Character Encode/Decode Mode
Code Hexadecimal
ESC [ < n > u 1B 5B < n > 75
n is a ASCII coded decimal number defined as follow:
n Display Mode
0
Set ASCII Encode/Decode mode
1
Set UTF-8 Encode/Decode mode
2
Set UTF-16 Encode/Decode mode
Description:
An encode/decode mode change resets the display.
Copyright © 2022, Diebold Nixdorf
01750364416 B 9-9