DIEBOLD NIXDORF CINEO C1010, User Manual, Page: 36 / 69

CINEO C1010 Cleaning the CINEO C1010
30 _
Cleaning the CINEO C1010
Safety Instructions for Cleaning Work

Pull out the machine’s mains plug when cleaning or removing units or components.

Moisten cloths only slightly to prevent fluid from entering the device. This would damage
the PCBs and optics.

Only use the recommended cleaning agents/tools and do not use solvents or scouring
agents that could affect the plastic and optics of the device.

Do not reconnect the equipment if the connecting cables show any damages or material
fatigue (e.g. porous cables).
General Information
i
The dust tray and return tray may be emptied and wiped out by the operator, as well
as the housing. For this use compressed air or a slightly moistened cleaning tissues.
i
The following actions can only be taken if the authorized personnel possesses the
keys for both locks.
Cleaning the Coin Path
Cleaning interval As required, at least twice a year
Cleaning agent/tool Hoover/vacuum cleaner, compressed air/high-pressure spray, soft
brush, slightly moistened cleaning tissues, cloth to cover bottom
units
i
The following actions can only be taken if the authorized personnel possesses the
keys for both locks.
Always use the hoover/vacuum cleaner first and then compressed air to remove all
loose particles in order that these will not fall into the bottom units and be smudged
onto the surface or into small cracks.

Switch the CINEO C1010 off.

Open the lid (cf. Chap. "Opening and closing the CINEO C1010 lid", p. 20) .

Remove dust and coin residues from the coin runway using the hoover/vacuum cleaner.

Remove remaining dust and coin residues using compressed air and a brush, if necessary.

Open the upper acceptance unit (cf. Chap. "Opening and closing the upper coin ac-
ceptance unit", p. 21).

Remove dust and coin residues from the coin runway using the hoover/vacuum cleaner.