DIEBOLD NIXDORF CINEO C1010, User Manual, Page: 28 / 69

CINEO C1010 Operation
22 _
Opening/Closing the Upper Coin Acceptance Unit
The coin acceptance unit consists of an upper and a lower layer. The upper layer can be
opened using a bayonet mount to eliminate a jam for instance:

Open the lid (page 20).

Press the lever (1) of the
bayonet mount.

Keep the lever pressed and
turn bayonet mount (2)
counter-clockwise as far as it
will go.

Carefully lift the arm (3) of
the coin validator.

Open upper acceptance unit
as far as it will go.

Close in reverse order.
Opening and C l osing the Coin Payout Unit
The coin payout unit can be opened and closed using a key for the lower lock (1 – see picture
below) to eliminate coin jamming, for instance, or to service the CINEO C1010.
i
Hand over the key to open the payout unit only to personnel allowed to access the
cash.
Though the CINEO C1010 stops running when the payout unit is opened, you should
always wait until a transaction has been finished before you open the payout unit to
not affect the coin counters.
If necessary, wait until a transaction has been finished and switch the CINEO C1010 off

Insert the key in the lower lock (1)
and turn it counter-clockwise as far
as it will go.

Open the payout unit by the handle
(2) as far as it will go.
1
2
3
1
2