20
20 Putting into service
After installation, switch on the system using the On/Off button on the front. First, an automatic self-test
takes place, during which the system is checked for its basic functions.
A decision is subsequently made regarding the medium from which the operating system and the soft-
ware application are to be started. This means that each medium is is assigned a logical drive depending
on the configuration of your system.
The following media can be assigned to a drive:
•
Network
•
Hard disk/SSD
•
USB drive
Once the operating system has started up without error, the software for the POS application will be
started automatically if necessary.
As soon as the workstation is ready for operation, this will be indicated by a message.
More detailed information can be obtained from the description of your user program.
01750341829F
20-1
Summary of Contents for BEETLE/M-III
Page 16: ...Before switching on Press this forward so that the cable cover closes flat 01750341829F 6 5...
Page 34: ...Removing the housing cover Lift off the cover upwards Set it aside 01750341829F 12 2...
Page 45: ...Storage Media 01750341829F 13 11...
Page 61: ...Accumulator optional The UPS monitor opens 01750341829F 18 9...
