manualshive.com logo in svg

DIEBOLD NIXDORF BEETLE /iSCAN EASY, User Manual, Page: 97 / 120

Share
Download
DIEBOLD NIXDORF BEETLE /iSCAN EASY User Manual Download Page 97

BEETLE /iSCAN EASY   

 

 

 

 

 

 

 

User Manual 

 

 

 

91 

Connector Variants 

USB/CASH DRAW/DC24V 

 
 
 
 
 
 
 
 

Energy-saving Mode 

If the TH230+ is switched on but without a print job it stays in standby mode, which means, 

that all functions of the printer are powered with low voltage to be ready for operation. 
In order to save more energy the printer changes into idle mode after an adjustable waiting 

time. Under idle condition the least amount of energy will be consumed. The mode will be 

indicated by flashing of the POWER LED. 
If the printer receives print data it will change into full powered printing mode. Having done 

the print job the TH230 will turn to standby mode and then to idle mode again. 
In the delivery status of the printer the function “idle mode” will be deactivated. The 

function and the according waiting time must be enabled in the configuration menu or via 

software. 

 

Summary of Contents for BEETLE /iSCAN EASY

























































































































Reviews:

No comments