DIEBOLD NIXDORF BEETLE /iSCAN EASY, User Manual, Page: 90 / 120

BEETLE /iSCAN EASY User Manual
84
2 - Red ERROR LED
Red Error LED off Normal condition
Red Error LED on Not ready for operating. Printer cover is not closed or
in combination with Yellow PAPER LED on, paper end is
reached
Red Error LED blinking An error occured. Switch off the printer and on again.
Contact your technical support if this does not work.
3 - Yellow PAPER LED
Yellow Paper LED off Paper is properly inserted.
Yellow Paper LED on Paper roll is near end.
Yellow Paper and red Error on Paper end is reached.
4 - Green POWER LED
All LED off Power is not stable
Green POWER LED on Power is stable
Green POWER LED blinking
Printing speed may be low (
*
). If necessary contact
your technical support
Green POWER LED flashes Printer in idle mode
(
*
) The printer will run with the lowest power value (48W) if a non current power supply
unit from Diebold Nixdorf or an external power supply unit without automatic current
identification is used.
With a suitable power supply unit type the maximal power value can be defined with the
configuration menu from 48 Watt up to 90 Watt.