DIEBOLD NIXDORF BEETLE /iSCAN EASY, User Manual, Page: 54 / 120

BEETLE /iSCAN EASY User Manual
48
Cleaning, Service and Maintenance
The device must be switched off for service and maintenance work (see chapter
"Basic Operation").
You should service and clean the parts of the device listed below at the specified intervals.
In addition, please note the following:

Take care not to drop any cleaning liquids into the device.

Only use the cleaning material listed in this manual. Inform the customer service re-
sponsible for you.
Information where to order the listed cleaning materials is given in the chapter "Appendix",
section "Approved cleaning materials".
Cleaning the housing
Cleaning interval: as needed
Cleaning material: Wet cleaning cloths
for stainless steel
surfaces
Ballistol oil for cleaning stainless steel
for varnished surfaces Professional cleaning set for EDP
equipment
for plastic surfaces Professional cleaning set for EDP
equipment
Cleaning the operator displays
Cleaning interval: as needed
Cleaning material: Wet cleaning cloths or
Lint-free cloth, moistened with some
water (e.g. dust cloth from professional
cleaning set for EDP equipment)