Connector Panel
10.2
10.2 Disconnecting cables
Never unplug a cable by pulling on the cable; always take direct hold of the plug itself. Follow the proce-
dure below when disconnecting cables:
•
Turn off all power and equipment switches.
•
Remove the cable cover.
•
Unplug all power plugs from the grounded-contact power sockets.
•
Unplug all data communication cables from the sockets of the data networks.
•
Unplug all cables from the devices.
Figure 10-1:
MINI-DIN plugs
1.
With MINI-DIN plugs ( Diebold Nixdorf key-
boards), the plug remains inserted until re-
leased.
2.
Pull the plastic covering from the connecting
socket with your thumb. The lock is released.
The metal of the plug is visible.
Figure 10-2:
RJ12 plug
3.
To release a RJ12 plug push the latch under
the plug to the top.
Figure 10-3:
USB-A connector
4.
Loosen the USB-A- connector by pulling at
the housing of the connector.
Figure 10-4:
P-USB connector
5.
The P- USB connector is disengaged by
pressing the spring that is marked by an ar-
row.
Copyright © 2020, Diebold Nixdorf
01750342843A
10-3