Installation to a stand
9.2.2
9.2.2
Preparing the system
1
1
1
1
1.
Place a piece of protection sheet on a flat
surface e.g. a table.
2.
Lay the display face down on the protection
sheet.
3.
Remove the 4 screws (1) that come with the
BEETLE A1150.
9.2.3
9.2.3
Installing system to the stand
NOTE
When installing the system to a stand with I/O Hub, install the I/O Hub before installing the
system to ensure stability of the structure.
1
1.
Fit the I/O Hub (1) into the base of the stand
as illustrated.
Copyright © 2020, Diebold Nixdorf
01750342843A
9-6