OPERATOR’S MANUAL
ISO
6
Version 4 Quick Start Guide
CONTROLS / 19
6011662 Rev B
Figure 12
Liquid Flow Valve Calibration
LIMIT OUTPUT
In certain instances, it is necessary to limit the output of the
control channel before running a valve calibration. System
capacities are greater than the actual desired capacities. These
features allow setting the maximum output of the channel to
prevent machine damage.
Perform a Limit Output:
1. At the Valve Calibration screen, press the
LIMIT OUTPUT
button.
2.
Move the implement to the “raised” position.
3. Apply the tractor brakes and lock in the applied position.
4. Put the transmission
in “park” or in a locked, neutral position.
5. Engage hydraulic system.
6. Run engine at normal operating RPM until hydraulic fluid is
at normal operating temperature.
