Dibo P50 WP, Instruction Manual

Page: 7 / 20

I 7
c Do not ever pull or lift the apparatus through the
electrical cable.
c Do not immerge the apparatus into water and neither
use water jets to clean it
c
Always remove the plug from the current socket before
undertaking any type of intervention on the apparatus
or if it is left unattended or within children or people’s
reach not quite conscious of their own actions.
c
Regularly control the feeding cable looking for
damages, cracks or ageing. Substitute the cable before
using it further.
c If the feeding cable is damaged it must be substituted by
the manufacturer or by its after sales service or in any
case by a similarly qualified person, thus preventing any
possible risk.
c When using extension electric wires ensure that they are
lying on dry surfaces and protected against possible
water jets.
m
Specialized personnel must always carry out
maintenance and repairs; any damaged part must be
substituted with original spare parts.
m It is forbidden to carry out changes to the apparatus.
Tampering could cause fi res and damages even lethal
to the user and the forfeiture of the guarantee.
m The manufacturer declines any responsibility for
damages caused to people or things due to
non-compliance with these instructions or if the
apparatus is unreasonably used.
Do not dispose of power tools into household waste!
According to the European Directive 2004/108/EC on waste
electrical and electronic equipment (WEEE) and its
incorporation into national law, power tools that are no
longer suitable for use must be separately collected and
sent for recovery in an environmental- friendly manner.
Old appliances contain valuable materials that can be
recycled. Please arrange for the proper recycling of old
appliances. Batteries, oil, and similar substances must not
enter the environment. Please dispose of your old
appliances using appropriate collection systems.
Safety English
Warning!
risk of injury!
Warning!
Danger of electric shock!
uK
ce Declaration of conformity
We declare under our sole responsibility
according to EG 2006/95/EC, that this product
is in conformity with the following standards
or standardization documents.
Product: Pump vacuum cleaner
Type: P50 WP
Applied harmonized standards
EN 55014-1: 2006+A1:2009
EN 55014-2: 1997+A1: 2001+A2: 2008
EN 61000-3-2: 2006+A1: 2009+A2: 2009
EN 61000-3-3: 2008
EN 60335-1: 2002+A1: 2004+A11:2004+A2:
2006+A12: 2006+A13: 2008+A14: 2010/Part1
EN 60335-2-69: 2003+A1: 2004+A2: 2008/Part 2-69
EN 60335-2-41: 2003+A1: 2004/Part 2-41
EN 62233: 2008
DiBO NV
Hoge Mauw 250, 2370 Arendonk (Belgium)
June 2011
Pierre Van den Borne
Managing Director