F U N C T I O N I N G
EN
DiBO 29
protection from burner is disabled.
Pay attention: this screen always appear if there will be
switched from position 0 to 1 (via key contact) when for
example; the required service period is necessary. Operate the
screen/joystick to remove the message from the display.
There are also messages of the DPF to start the active regeneration or when
this is already active, see messages below. Move the operating lever to the left
or right to confirm / not confirm or push the ‘OK’ button.
Please note with active regeneration: it is always better to set to ‘yes’
preventively, except when you work in EX zones. The active
regeneration prevents the filter from clogging. Note: the exhaust
temperature will also rise.
11
Failures
The screen includes a number of failures like indicated on this page.
