BABYPACK 3246 N
196 Coolidge Av. Englewood, N.J. 07631
Tel. : 201-871-8787 Fax : 201-871-8908
Website : www.dibipack.com - Email : [email protected]
16
10
1
0
1
2
METHOD OF USE
Grasp the film in the left hand and pull it in the
same direction for a few centimetres in order to
permit the product to be packaged to be introduced
easily.
Lift the upper edge of the film with the left hand.
Place the product to be packaged on the loading
platform with the right hand, so that it is positioned
against the sealing and the folded part.
Without letting go of the product held in the right
hand, move it to the left, using the left hand to pull
the film, holding it by the waste film, place it on the
grille at a distance equal to approximately half its
height.
Lower the hood with the right hand, using the
special handle, until it is perfectly closed.
Apply light pressure until the left hand is able to
detach the waste material.
If working in SEALING ONLY mode, at this stage
reopen the hood, reaccompanying it to its resting
position.
Remove the wrapped product.
If working in S SHRINK-WRAPPING
mode, keep the hood closed, without applying any
pressure, until the film has shrunk around the
product.
Reopen the hood, reaccompanying it to its resting
position.
Remove the wrapped product.
