Omini o
perator’s
manual
version :19.04.17
7
I
NSTALLING THE WATER PURIFIER
5.1
I
NSTALLATIONS
C
ONDITIONS
Water inlet (2 to 5 bars) equipped with a turn hand valve or a male exit tap of 15/21 or 20/27.
Protected electric input (230 V ~, 50 Hz + EARTH).
Drain
5.2
C
ONNECTIONS
Connect to tap water inlet by
using « male simple union »
–
Integrate an « isolation hand
valve »
Purified water outlet to be
connected via a tubing to an
"isolation valve" allowing water
to be drawn for the analyzer
To be connected to the storage
tank
Drain of the osmosis unit to be
connected directly to the
sewer (to avoid to damage the
system, must be always open
; do not connect a valve )
Connect to tape water inlet by
using « male simple union »
–
Integrate an « isolation gate »