81
R
ESULT
C
ODES
This section addresses the following topics:
• R
ESULT
C
ODE
C
OMMANDS
• S
AMPLE
R
ESULT
C
ODES
• D
ETERMINING
W
HICH
R
ESULT
C
ODES
TO
U
SE
• M
ODEM
R
ESULT
C
ODES
R
ESULT
C
ODE
C
OMMANDS
The following commands control result codes.
ATQ
Enables result codes (default).
ATQ1
Disables result codes.
ATV
Displays result codes as numbers.
ATV1
Displays result codes as words (default).
ATW
Reports computer (DTE) rate only as CONNECT: (DTE) (default).
ATW1
Reports computer rate as CARRIER (DCE), PROTOCOL, CONNECT (DTE).
ATW2
Reports connection DCE rate only as CONNECT (DCE).
S
AMPLE
R
ESULT
C
ODES
The following result codes are returned when your computer rate is set to 38,400 bps in your
telecommunications software; your modem connects to a 9600 bps modem that supports V.42;
C