Elton User Manual Rev 1.04
Page 22
Audio Signal Connector: J13
The audio signal interface implements audio-port switching functionality with digital microphone
and
speaker outputs.
The audio signals are terminated at the 2x5 header with the following pinouts.
NOTE
: The Line-In feature is not supported by the Elton BSP (Board Support Package).
LineOut-L
A01 B01
LineOut-R
GND_Audio
A02 B02
GND_Audio
LineIn-L
A03 B03
LineIn-R
GND_Audio
A04 B04
GND_Audio
NC
A05 B05
MIC_IN
Connector Type:
2mm Dual-Row Right Angle Pin Header
Mating Cable Part Number for Latching Connector:
6980608
Mating Cable Part Number for Pin Header:
6981076
HDMI Connector: J19
The baseboard integrates a High Definition Multimedia Interface (HDMI) V2.0 interface The HDMI signals
are terminated at the 2x10 header with the following pinouts.
The connector shell is tied to the Chassis Ground.
Data 2+
A01 B01
Ground
Data 2-
A02 B02
Data 1+
Ground
A03 B03
Data 1-
Data 0+
A04 B04
Ground
Data 0-
A05 B05
Clock+
Ground
A06 B06
Clock-
CEC
A07 B07
Reserved
DDC Clock
A08 B08
DDC Data
Ground
A09 B09
+5V
Hot Plug Detect
A10 B10
Chassis Ground
Connector Type:
2mm Dual-Row Right Angle Pin Header
Mating Cable Part Number for Latching Connector:
6980605
Mating Cable Part Number for Pin Header:
6980522
