Elektra CPU User Manual V1.00
Page 56
Page 2, Base+13
Write/Read
Jumper override
Bit
No.
7 6 5 4 3 2 1 0
Name
ADUOUT ADUOEN SDOUT
SDOEN
SDOEN
SE/DIFF output enable:
If this bit is enabled the register setting of SDOUT will override J13 jumper setting for
SE/DIFF (single-ended/differential)
1
SE/DIFF determined by SDOUT
0
SE/DIFF determined by J13 jumper setting [default]
SDOUT SE/DIFF
value:
1 Single-Ended
0 Differential
[default]
Read back: If SDOEN=1, this bit reads back as the last value written to SDOUT. If
SDOEN=0, this bit reads back as the logical state of the input to this pin at J13.
ADUOEN ADUNIP output enable:
If this bit is enabled the register setting of ADUOUT will override J13 jumper setting
for A/D Unipolar/Bipolar
1
A/D polarity determined by ADUOUT
0
A/D polarity determined by J13 jumper setting [default]
ADUOUT A/D polarity value:
1 Unipolar
0 Bipolar
[default]
Readback: If ADUOEN=1, this bit reads back as the last value written to ADUOUT. If
ADUOEN=0, this bit reads back as the logical state of the input to this pin at J13.
When enhanced features are disabled, all values in this register revert to 0.
