REAR SWING FLAIL
OPERATOR’S MANUAL
CONTINUED ON NEXT PAGE
TREE CUT
Use to cut small trees or brush without mulching.
•
For small trees, start working at the top and cut the tree in 12” (305mm)
increments.
•
With the Flail Mower lifted slightly, drive straight into the material.
•
Allow enough time for the tree section to fall away while cutting.
•
Use a smooth, quick action to cut the material completely.
◦
NOTE:
Never drop the mower straight down on trees. Severe damage
will incur.
NO PANCAKING!
OPERATING TECHNIQUES
17
