REAR SWING FLAIL
OPERATOR’S MANUAL
CONTINUED ON NEXT PAGE
GRASS & BRUSH CUT
Use to cut grass or brush.
•
Lower the front of the deck slightly to ensure that there is ample room
for exhausted material to be dispersed.
◦
If you hear the cutting shaft, or engine slow down, lift up the head
and/or slow your ground speed.
•
A second pass may be needed for heavy brush or grass.
◦
Complete the initial pass at 12” (305mm) into the material.
◦
Complete a second pass at ground level to thoroughly mulch the
remaining material.
OPERATING TECHNIQUES
1
2
2
1
15
