REAR SWING FLAIL
OPERATOR’S MANUAL
CONTINUED ON NEXT PAGE
Always test a PTO drive shaft
connection by giving it a hard tug
in an attempt to disengage it. Do
not use a PTO drive shaft that fails
to stay locked to a splined shaft!
Serious damage, injury or death
can occur!
•
Push in the spring loaded locking
pin
(6)
on the PTO drive shaft
(5)
and
slide it onto the slip clutch’s
splined shaft
(4)
.
◦
Push until the spring loaded
locking pin
(6)
on the PTO drive
shaft
(5)
locks into place in the
groove on the slip clutch’s
splined shaft
(4)
.
•
Push in the spring loaded locking
pin
(6)
on the other end of the PTO
drive shaft
(5)
and slide it onto the
gear box’s splined shaft
(7)
.
◦
Push until the spring loaded
locking pin
(6)
on the PTO drive
shaft
(5)
locks into place in the
groove on the gear box’s
splined shaft
(7)
.
•
Attach the PTO drive shaft safety
guard
(8)
to the gear box
(7)
.
(6)
(4)
(1)
(5)
(5)
(6)
(7)
(5)
(1)
(7)
(8)
(5)
(2)
(6)
11
