© Diamond Mowers®, LLC
The case drain line must be properly
connected or you will damage your
hydraulic motor. The case drain line
will come equipped with both male and
female QD couplers.
•
Install the QD coupler(s) that
matches the machine.
◦
NOTE:
The pressure hose will
have a red ID band attached.
•
Attachment is shipped with 1/2”
flat face connectors, which are a
common size for most skid-steer /
compact track loaders.
◦
Larger couplers are available to
purchase at
DiamondMowers.com.
•
Clean connections before
attaching
(1)
to prevent
contamination.
◦
NOTE:
The pressure
(1)
hose will
have a red ID band attached.
•
Make sure hoses are positioned
so they do not pinch between the
mulcher and the carrier.
•
Start machine at low idle and verify
that the drum is spinning in the
correct direction - teeth are cutting.
◦
If the pressure and return hoses
are reversed, the drum will
NOT spin.
•
If this reversal occurs, either
inverse the flow from your machine,
or switch the QD couplers on the
pressure and return hoses.
QD COUPLERS
(1)
9
