MEMO2GO Handling Instructions Level 1
V 1.5
13-04-2018
1
MEMO2GO Handling Instructions Level 1
The following steps are recommended to achieve an effective and trouble-free installation and operation of your
MEMO2GO system:
Prepare a consignment (in the Carpenter Workshop)
- Take required items from inventory
- Connect items as shown above
- Program SPECIAL CHIP CARDS on all controllers of this
consignment. Refer to page 4 of this manual
- Program ACCESS CHIP CARDS and ACCESS KEY FOBS
on all controllers of this consignment. Refer to page 5
of this manual
- Change CONTROLLER SETTINGS on all controllers of this
consigment (if necessary). Refer to page 6 and 7 of this
manual - otherwise use factory settings
Power Supply
Controller
Antenna