7.2.2. Past Session Charting
During your historical session, you can manually chart your past pitches.
In a historical session select the grid icon (center icon) from the dark grey bar at the top of the page. You’ll
see a strike-zone grid with several colored shapes across the top. Each colored shape is a different pitch
type. These pitch types will match the ones selected in your profile. Make sure that your pitches are
showing across the top of the screen. If they are not, select the green circle with white arrows in the lower
right corner. Next select
Show Pitches
.
1. Select a pitch from the top of the page (each pitch is represented by a diamond and a number)
2. Select the small pencil icon to the right hand side of the strike-zone
3. Select a pitch type by clicking on it’s shape
4. Select where on the grid that pitch was thrown
5. Select another pitch (again, represent by a diamond and number)
6. Select where on the grid that pitch was thrown (in the diamond on the pitch you just edited, the
number will change to an abbreviation of that pitch type )
7. Continue until you’re done with your pitch session or done charting pitches
#Once done, select the white ‘
x
’ to the right of the strike-zone
As a note if you don’t want to chart a pitch, you don’t have to. Skipping charting a pitch will not mess up the
charting.
Editing Charted Pitches
If you want to change a pitch you’ve already charted select the pitch from the top. You can change the pitch
type by selecting a different shape or change the location by selecting a different point on the grid. When
you’re done, go ahead and through your next pitch!
Diamond Kinetics
PitchTracker Baseball - PitchTracker Ba
Page 29 of 76
