Dialogic SS7G21, Hardware Manual

Page: 24 / 91

24
Chapter 4 Regulatory Specifications and Declarations
Declaration of Conformity
No: D0006
Revision 01
The equipment described below is declared to be in conformity with the following applicable national and international standards .
The conformity is valid ONLY when the equipment is used in a manner consistent with the manufacturer’s recommendations and the
reference documents.
Equipment Type(s): Signalling Server
Dialogic SS7G22
Document No / Edition /Date Title
IEC 60950-1 – 1
st
Edition (2001-10) Safety of Information Technology Equipment [CB Certificate issued]
UL/CSA 60950-1 – 1
st
Edition (2003) Safety of Information Technology Equipment
EN 60950-1: 2001 + A11 Safety of Information Technology Equipment
AS/NZS 60950.1: 2000 Safety of Information Technology Equipment
FCC, 47 CFR Part 15, Class A digital device Radio Frequency Devices - Subpart B - Unintentional Radiators
ICES-003 Issue 4 - Feb 2004, Class A Interference-Causing Equipment Standards - Digital Apparatus
EN 300 386 V1.3.3 (2005-04) ERM; Telecommunication Network Equipment; EMC
EN 55022: 1998 + A2, Class A Limit Information Technology Equipment - Radio Disturbance Characteristics
EN 55024: 1998 + A1 + A2 Information Technology Equipment - Immunity Characteristics
EN 61000-3-2: 2000 + A2 EMC – Limits for Harmonic Current Emissions
EN 61000-3-3: 1995 + A1 + A2 EMC – Limitation of Voltage Changes, Fluctuations and Flicker
CISPR 22 Ed 4.0 (2003-04), Class A Limit Information Technology Equipment - Radio Disturbance Characteristics
TIA-968-A - Oct 2002, Subpart 4 Technical Requirements for Connection of Terminal Equipment to the Telephone Network
CS-03 Issue 8, A7 – July 2004, Part II Specification for Terminal Equipment, Terminal Systems, Network Protection Devices. Connection Arrangements
ETSI TBR 12 + A1 ed.1 (1996-01) 2048 kbit/s Digital Unstructured Leased Lines (D2048U): Attachment Requirements for Terminal Equipment I/F
ETSI TBR 13 ed.1 (1996-01) 2048 kbit/s Digital Structured Leased Lines (D2048S): Attachment Requirements for Terminal Equipment I/F
Additional information:
Australia test reports :
Nemko test report # 33077 dated 09-Dec-2004 covers AS/NZS 60950
Hursley EMC Services test report # 04R256CR dated 20-Oct-2004 covers EN 300 386
Regions:
European Economic Area (EEA) :Dialogic (address below) declares the equipment in compliance with the essential requirements of EC Council Directives :
1999/5/EC - R&TTE : 2006/95/EC - Safety/LVD : 89/336/EEC – EMC
USA : Dialogic (address below) make this SDoC as Responsible Party for the T1 interface board(s) used in this equipment.
The included T1 interface board(s) are registered with ACTA as number : US: ICKCNNANSS7HDP
Canada : Dialogic (address below) is the Declaring Party for the T1 interface board(s) used in this equipment.
The included T1 interface board(s) are registered with Industry Canada as number : IC: 885F-SS7HDP
Australia / New Zealand : Supplier Code N-964 [Dialogic Pty Ltd - Level 12, 1 Pacific Highway North Sydney NSW 2060] : ACN: 064 824 899 .
Any other region where the Regulatory Requirements are satisfied by compliance to the standards declared above.
This Declaration of Conformity is issued by
Dialogic Corporation
, which is solely responsible for the declared compliance.
Company Address:
Dialogic Corporation
9800 Cavendish 5
th
floor
Montreal, Quebec
Canada, H4M 2V9
Place of Issue:
Dialogic (UK) Limited,
21 Green Lane,
Fordingbridge, Hampshire,
SP6 1HU, UK
Authorized signature, name and function:
John Matthews – Engineering Manager
Date:
02, April, 2007
Dialogic Distribution Limited, our location in Europe operates from:
Unit 4034 Kingswood Avenue Citywest Business Campus, Saggart, Co. Dublin, Ireland.
Copies of this Declaration of Conformity may be downloaded at http://www.dialogic.com/declarations