Mitel SX-2000 Lightware
46
•
Under
Options
, select
Network-side Interface
and
Qsig
.
•
Click
Update
and then
Close
.
Step 3: Configure the PRI Link Characteristics as follows:
Select
Config
>
System Configuration
>
PRI Link Characteristics
.
Note: Parameters not listed below can be left at their default settings.
•
Set
PRI link number*
to the link number in which the T1 Q.SIG is installed.
•
Set
Protocol Type
to
QSIG
.
•
Set
Protocol Variant
to
ISO
.
•
Set
Physical Type
to
T1/CSU
.
•
Select
Network-side / Qsig master
.
•
Click
the
Characteristics
button.
•
Configure
the
T1/CSU Characteristics
as follows:
