Mitel SX-2000 Lightware
14
Once an address map rule is created, it can be applied in three different places. To ease the configuration and
troubleshooting processes, apply the rule on the outbound route as shown below:
Inbound call example using address map:
This example assumes that the PBX sends inbound calls using a 4-digit extension, with the ISDN type of number
flag set to
Subscriber
for internal numbers,
National
for national calls, and
International
for
international calls.
Called number
From PBX
To Microsoft
®
OCS
Internal
xxxx (with subscriber type of number)
+1716639xxxx
Calling number
From PBX
To Microsoft
®
OCS
Calling from internal
xxxx (with subscriber type of number)
+1716639xxxx
Calling from national
xxxxxxxxxx (with national type of number)
+1xxxxxxxxxx
Calling from international xxx…xxx (with international type of number)
+xxx…xxx
Sub rule name
Expression
Format
Stop on match
Called ^S(\d{4})$
+1716639$1
Not
checked
Calling - internal
^S(\d{4})$
+1716639$1
Checked
Calling - national
^N(\d{10})$
+1$1
Checked
Calling - international
^\+
+
Checked
