UM-GP-002
GreenPAK Advanced Development Platform
User Manual
Revision 2.2
21-Feb-2020
CFR0012
17 of 40
© 2020 Dialog Semiconductor
The next component in this design is the Look Up Table. First Look Up Table (LUT4) is used to
generate logic “1” only when there are high logic levels on both inputs (AND gate). Select AND gate
from
“Standard gates” drop-down menu or set table manually. Second Look Up Table (LUT5) is
configured as NOR gate. It is used to generate reset signal for counter on Pin 3 falling edge.
Figure 13: Look Up Table Properties Configured as AND Gate