diagenode BioAcc-cool, Operation Manual

Page: 52 / 60

Shutting down
OPERATION MANUAL Chapter 8
Water Cooler
Errors and omissions excepted. V1.1.0en/13.12.12
52
8.1 Safety instructions and basic principles
Connection/adjustment to the power supply not carried out by an electrician
and/or connection to power socket without protective earth (PE)
MORTAL DANGER FROM ELECTRIC SHOCK
Have the connection/adjustment to the power supply carried out by an electrician.
Connect the temperature control unit only to power sockets with protective earth (PE).
G07
Damaged power cable/power cable connection
MORTAL DANGER FROM ELECTRIC SHOCK
Do not start up the temperature control unit.
Isolate the temperature control unit from the power supply.
Have the power supply cable/power supply connection replaced and inspected by an electrician.
Do not use a power supply cable over
3 m long.
G02
Risk of tipping due to unstable temperature control unit
SERIOUS INJURY AND PROPERTY DAMAGE
Avoid the risk of tipping due to unstable temperature control unit
W05
Non-compliance with the safety data sheet for the thermal fluid to be used
INJURIES
Risk of injury to the eyes, skin, respiratory tract.
The safety data sheet for the thermal fluid to be used must be read prior to use and its contents
respected.
Observe the local regulations/work instructions.
Wear your personnel protective equipment (e.g. temperature-resistant safety gloves, safety gog-
gles, safety footwear).
Risk of slipping on dirt on the floor and around the workplace.
V07
Hot or very cold thermal fluid
SERIOUS BURNS/FREEZING OF LIMBS
Before starting the draining process, you must make sure that the thermal fluid has been brought
to room temperature (20 °C).
If, at this temperature, the thermal fluid is too viscous to be drained: Control the temperature of
the thermal fluid for a few minutes until the viscosity will allow drainage. Never control the tem-
perature of the thermal fluid when the
>Drain valve< [4] is open.
Close >Drain valve< [4] by turning clockwise (by 90° to the right up to the stop).
Caution: risk of combustion when draining thermal fluid at temperatures over 20 °C.
Wear your personal protective equipment when carrying out the drainage operation.
Drain only using suitable drain hose and container (must be compatible with the thermal fluid
and the temperature).
V14
All safety instructions are important and must be followed accordingly during working operations!
HAZARD
HAZARD
WARNING
CAUTION
CAUTION
INFORMATION
.