Di-soric ID Series, Quick Start Manual, Page: 1 / 2

© 2011 di-soric
Step 2 — Connect the System
Connecting by RS-232 / RS-422 / RS-485
• Connect the imager ( 1 ) to the VSID-IB-S/ VSID-A-24/5V-S interface ( 2 )
and ( 3 ).
• Connect the communication cable ( 6 ) to the host, and to the host port
on the VSID-IB-S.
• Connect the object detector ( 5 ) to the VSID-IB-S.
• Connect the power supply ( 4 ) to the VSID-IB-S.
• Apply power to the imager.
Hardware Configuration
Caution: Be sure that all cables are connected BEFORE applying power
to the system. Always power down BEFORE disconnecting any cables.
Scanner
Networ
k
Host
1
3
2
4
5
6
Step 1 — Check Hardware
Item Description Part Number
1 MINI Imager ID-04-IM1-x-x
2 Adapter 24V to 5V DC VSID-A-24/5V-S
3 Interface Box VSID-IB-S
4 Power SupplyM12, 3 poled VSID-PS-IB
5 Object Detector
6 Connecting cable 1.8 m VSID-K-25S/9K-2
Scanner
Networ
k
Host
Hardware Required
1
3
2
4 5
6
Quick Start Guide
ID Imager Series
P/N 83-116302 Rev D
Step 3 — Position Imager
• Place the imager and test symbol in a location with as little ambient light
as possible.
• Position the imager at a focal distance between 2” and 6” from the symbol .
• Tip the imager relative to the symbol to avoid glare from specular reflection.
Avoid excessive skew or pitch. Maximum skew is
±30° ; maximum pitch is ±30° ).
• Symbols can be rotated (tilted) at any angle; however, for best results
symbols should be aligned with the FOV (field of view). In the case of linear
symbols, aligning the bars in the direction of their movement (“ladder”
orientation) will minimize the chances of blurring and No Reads.
Imager / Symbol Positioning
Step 4 — Install di-soric ID
di-soric ID Software can be found on the di-soric Tools USB Stick that is
packaged with the imager.
1. Follow the prompts to install di-soric ID Software from the USB
Stick
2. Click on the di-soric ID icon to run the program.
Note: di-soric ID Software can also be installed from the Download
Center at www.di-soric.com .
Refer to the user’s manual for detailed information about using di-soric ID
to configure the imager.
WARRANTY
Standard Warranty: One Year
All di-soric products are backed by a one-year stan-
dard warranty. Full warranty details are online at
www.di-soric.com