Di-soric ID-08, User Manual, Page: 62 / 174

5-4
ID-08 / ID-09 High Performance Imager – User´s Manual
Default Continuous Event
Default Continuous Event
This parameter allows you to determine the default state of the reader.
Idle (Default)
When Default Continuous Event is set to Idle , the reader will remain inactive until triggered.
Show Target
When Default Continuous Event is set to Show Target , the reader will display the target
LEDs but remain inactive until triggered externally.
Motion Detect
When Default Continuous Event is set to Motion Detect , the reader will remain inactive
until motion occurs in the field of view (if a symbol is hand-presented, for example).
Read Both Fields
Both Near Field and Far Field will be continuously activated to capture an image.
Read Near Field
Near Field will be continuously activated to capture an image.
Read Far Field
Far Field will be continuously activated to capture an image.
Read Primary Field
When Read Primary Field is selected, the most recent field to have produced a Good
Read (Near Field or Far Field) will be continuously activated to capture an image.
Event Delay
The default Event Delay is 0.100 seconds.