manualshive.com logo in svg

Di-soric ID-08, User Manual, Page: 25 / 174

Share
Download
Di-soric ID-08 User Manual Download Page 25

ID-08 / ID-09 High Performance Imager – User´s Manual

2-7

Using di-soric ID - Software

Options

You can use the 

Options

 menu to save memos and set up 

ID-

Software

 preferences.

Preferences will be saved and loaded into 

ID-Software

 the next 

time 

ID-Software

 is opened, whether or not you save the 

ID-Soft-

ware

 file to the host computer.

Preferences > General Tab

Reload Last File

At startup, reloads the last file saved to the computer.

Show Model Prompt

At startup, remembers the last connected model and displays it in the 

Connecting...

 

dialog whenever you attempt to connect.

Show Connect Prompt 

At startup, displays the 

Would you like to connect...

 prompt.

Receive After Connect

At startup, loads the reader’s settings into 

ID-Software

. (This is not recommended if you 

want to preserve your 

ID-Software

 settings for future use.)

Skip EZ Mode

At startup, skips 

EZ Mode

 and opens directly in 

App Mode

.

The 

Toolbar Style

 

options allow you to 
determine how 

ID-Soft-

ware

 will display the 

mode options in the 
two rows at the top of 

Summary of Contents for ID-08















































































































































































Reviews:

No comments