Di-soric ID-08, User Manual, Page: 156 / 174

A-36
ID-08 / ID-09 High Performance Imager – User´s Manual
Serial Commands
50 Aztec Symbology 1
Binary Dip Switch
53 Decoder HD field (FOI0) Width 280 (#640)
Valid Range: 1 to 640 pixels
Decoder uses only the specified pixel
width in the HD field (FOI0).
Also see registers: 54, 98, 99
54 Decoder HD field (FOI0) Height 3C0 (#960)
Valid Range: 1 to 960 pixels
Decoder uses only the specified pixel
height in the HD field (FOI0).
Also see registers: 53, 98, 99
55 Notify Of Read Failure 0
0: Disabled
1: Send “r” packet on no-read (See “r”
packet in Packet Data.)
0x100xx: post event on no-read, where
the lower 8 bits specify the event number.
For example, 0x10009 to post Event
0x09.
59 Beep Duration 64 (#100)
Valid Range: 0 to 7FFFFFFF Milliseconds
Also see registers: 26, A7
66 Bypass Illumination 0 Valid Range: 0 to 64 (#100) percent
6A UPC Symbology 1
0: Disabled
1: Enabled
Also see registers: 4D, 4E, 74
6B Code 39 Symbology 1
0: Disabled
1: Enabled
Also see register: 70
6C Code 93 Symbology 1
0: Disabled
1: Enabled
6D Code 128 Symbology 1
0: Disabled
1: Enabled
6E Interleaved 2 Of 5 Symbology 1
0: Disabled
1: Enabled
Also see registers: 71, C9
6F Codabar Symbology 1
0: Disabled
1: Enabled
Bit Controls Value
0 Aztec decoding
0: Disabled
1: Enabled
1
Inverse Aztec decod-
ing
0: Disabled
1: Enabled