Di-soric ID-08, User Manual, Page: 151 / 174

ID-08 / ID-09 High Performance Imager – User´s Manual
A-31
Appendices
2C Idle Mode Countdown Timer (ms) 64 (#100)
Valid Range: 0 to 7FFFFFFF Milliseconds
Counts down to the change to Idle Mode.
The most significant bit (MSB) of the 32-
bit register indicates whether this timer is
enabled. Enable or Disable the timer by
setting the MSB.
You can change the big directly by setting
the register value (such as setting to
#100) or you can change the value of just
the MSB using the O (set), Q (clear) or /
(toggle) bit commands. See
Command
Types for more information on these
commands.
Idle Mode is the time between the last
user interaction with the reader (button
press, etc.) or firmware interaction (com-
munications, etc.) and Standby Mode.
There are many user and firmware events
that will reset the timer. Therefore, it may
seem that the timer is longer than the
value set.
This state: Active (highest power usage)
Next state: Idle
2D Keyboard Maps 0
0: US English (without leading 0 in the
ALT _ Number)
1: ASCII (ALT+number) - universal
2: Custom (requires user to download
keyboard map)
3: US English (with leading 0 in the ALT +
number for non-printable ASCII)
4: French Keyboard
5: German Keyboard
6: Japanese Keyboard
7: US English (with CTRL + char for non-
printable ASCII)
34
Maximum Candidate Decodes Per
Read
1
The Reader will process up to this num-
ber of codes per “read code” event. If
there are more than this many codes in
the field of view and within target toler-
ance, only the first ones will be decoded.
For fastest performance with single
codes, set to 1.
Action Command
Enable O(32)#-2147483648
Disable Q(32)#-2147483648
Toggle /(32)#-2147483648