Di-soric ID-08, User Manual

Page: 149 / 174

ID-08 / ID-09 High Performance Imager – User´s Manual
A-29
Appendices
1B Communications Mode 8
1: RS232 serial
2: USB keyboard
5: USB Native (HID)
6: USB VComm
7: USB HID POS -Terminal 131
8: Dynamic (1 if decode is RS232; 2 if
decode is USB)
This setting is used in conjunction with
settings 08 and 42 to configure the com-
munication mode between standard “one-
way” and “two-way” modes.
For example, USB “two-way” native:
1b: 5 (USB Native)
08: 2 (packet mode)
42: 1 (expect rdi-soric ID - Software-
onse)
Note: The following must be completed
within 1 second.
first output report with numlock set and
capslock clear
second output report with numlock set
and capslock clear
third output report with capslock set num-
lock clear
fourth output report with capslock set
numlock clear
fifth output report with numlock set and
capslock clear
sixth output report with numlock set and
capslock clear
On the last output report comm protocol is
set to raw mode, comm expect rdi-soric
ID - Softwareonse is false and comm
mode is USB Downloader mode.
Also see registers: 08, 42
1C Serial Baud Rate
1C200
(#115200)
All standard baud rates up #115200
• #9600 (2580)
• #19200 (4B00)
• #38400 (9600)
• #57600 (E100)
• #115200 (1C200)
1D Serial Stop Bits 1
1: One
2: Two
1E Serial Data Bits 8
7: Seven
8: Eight