DLEV1
Operating Instructions
- 12 -
4 Unit Description
The DLEV1 is a handheld testing adaptor designed to interface between
electric vehicle supply equipment (EVSE) and a multifunctional electrical
installation test instrument. Tests are selected using the two rotary
switches and three push buttons.
4.1 Identifying parts of the DLEV1
The numbering below refers to figure. 1
1.
CP Error
“E” Button
2.
PE Error (Earth Fault) Button
3.
PE Pre-Test Touch Electrode
4.
PE Pre-Test Warning LED Indicator
5.
PP State Rotary Switch
NC
No cable
13A
13A cable current capability
20A
20A cable current capability
32A
32A cable current capability
63A
63A cable current capability
6.
13A Mains Socket for test purposes only or loading. Maximum
current 10A
7.
PE Measurement Terminal
8.
Single & 3 Phase Measurement Terminals (L1, L2 & L3)
9.
Phase LED Indicators (L1, L2 & L3)
10.
Neutral Measurement Terminal
11.
CP State Rotary Switch
A
Electric vehicle (EV) not connected
B
Electric vehicle (EV) connected & not ready to
charge
C
Electric vehicle (EV) connected; ventilation not
required & ready to charge
D
Electric vehicle (EV) connected; ventilation
required & ready to charge
12.
Test cable for EV charging point Type 1/Type 2 with socket
outlet or fixed cable with vehicle connector
13.
EV test cable input
14.
CP Signal Output Terminal
15.
CP Signal Output Terminal (Connected to PE)