Dhollandia DH-S Series, Installation Manual

Page: 71 / 82

70
DHOLLANDIA
16.8 ELECTRIC AND HYDRAULIC INFORMATION
•
Because of the wide choice in different control boxes and electrical options, appendix 3 only includes the basic diagrams for fully
standard liftgates.
o
The correct diagram applicable for the liftgate supplied can be found on the inside of the control box. If correct diagram is
not present inside control box, contact your national DHOLLANDIA distributor for further assistance, or download from the
website.
o
Other important information sources available on the website:
1. FIT-ELEC-GENERAL.. - (latest update) for installation of main control box, battery and ground cables
2. FIT-ELEC-OPTION.. - (latest update) for installation op extra controls and electrical options
•
Remark: the following minimum cable sections are recommended (+) battery cables and (-) ground cables
Recommended MIN. cable sections for (+) battery cables and (-) ground cables
Size electric motor Cable section
500 W 16 mm² - 5 AWG
1200 - 2200 W up to max. 3300 lbs capacity (length ≤ 23 ft)
1200 - 2200 W up to max. 3300 lbs capacity (length > 23 ft)
25 mm² - 3 AWG
35 mm² - 1 AWG
1200 - 2200 W above 3300 lbs capacity (length ≤ 42 ft)
1200 - 2200 W above 3300 lbs capacity (length > 42 ft)
35 mm² - 1 AWG
50 mm² - 0 (1/0) AWG
3000 W (only 24V) 35 mm² - 1 AWG
Long motor cycles (double deck, power down) 50 mm² - 0 (1/0) AWG
•
Batteries and their charging system should be chosen to comply with following minimum requirements:
Voltage System
12V 24V
Liftgate
capacity
(lb / kg)
Electrical
power
(Amp)
Battery
capacity
(Ah)
Generator
output
(A)
Electrical
power
(Amp)
Battery
capacity
(Ah)
Generator
output
(A)
≤ 1750 / 800 200 143 70 150 105 (2X) 70
≤ 2200 / 1000 250 143 70 200 105 (2X) 70
≤ 3300 / 1500 250 180 90 200 180 (2X) 90
> 3300 / 1500 250 180 110 250 180 (2X) 110
> 3300 / 1500
Freq. Usage
300 220 110 300 220 (2X) 110