25
DHOLLANDIA
10.2
GENERAL REMARKS
•
Unless the mount plates are also bolted to the subframe / long rail, make sure the chassis and the subframe are connected in the
area behind the mount plates in a sufficiently strong way to prevent the chassis from bending away from the subframe / long rail.
NOTICE
•
All metal works (drilling, cutting, grinding, welding) to the chassis, chassis subframe, rear sill and vehicle body require adequate
anti-corrosion protection. Make sure you comply with the instructions of the vehicle manufacturer.
•
ALWAYS protect and cover thermoplastic hoses with a welding blanket. Inspect the hoses after finishing the metal works and
replace any damaged hoses.
NOTICE
WARNING
•
In case of doubt how to install the liftgate correctly, DO NOT go any further, but ask your local DHOLLANDIA distributor for
professional advice.
•
Negligence can put the technical personnel, the operator, and third parties at great risk, and could result in severe injury or death.
