Dhollandia DH-RM.25, Installation Manual, Page: 11 / 79

10
DHOLLANDIA
6.1 INSTALLATION PARAMETERS TERMINOLOGY
See Figure 6.2 on next page for parts corresponding to numbers in this table.
LARM Length of the lift arms [= Lift ARM length]
VFH max Max. height of vehicle floor (UNLOADED), applicable for the given arm length [= Vehicle Floor Height]
VFH Actual height of vehicle floor (UNLOADED)
VFH min Min. height of vehicle floor (FULLY LOADED)
CTH max Max. height from underside of chassis to top of the vehicle floor, applicable for the given arm length [= Chassis Total
Height]
CTH Actual height from underside of chassis to top of the vehicle floor
MFT Mounting height of lift frame under the vehicle: measured from the top of vehicle floor to the top of the lift frame main tube
[= Mounting height Floor to Tube of frame]
MTG Mounting height of lift frame above the ground: measured from the top of the lift frame main tube to the ground
[= Mounting height Tube of lift frame to Ground]
MPG Ground clearance under tail lift [= Mounting clearance Plates to Ground]
PD Maximum length of the main and foldable platform sections [= Platform Depth]
LOF Required mounting space to end of lift frame [= Lift Overhang to Frame]
LOP Required mounting space to end of premounted pump unit [= Lift Overhang to Pump unit]
LBUG Vertical clearance of RUPD to ground [= Lift Bumper to Ground]
LBUP Horizontal dimension from rear of platform to rear of RUPD [= Lift BUmper to rear of Platform]